Catalog No.10-1

 
 

Low pressure loss, Low-cost type TSK-PN nozzle

ブローノズル 集合写真

    Rapid removing water, Drying, Cooling,
    Even surface treatment, Air-curtain

 

[ Common specification ]

 

・ Resisting pressure : 49kPa
・ Max. use temp. : 200゚C
・ Material : Aluminum4
・ Accuracy rating : Disorder of the air-
    speed of the right and left is less than
    plus minus 3.5%
・ Fixed metal fittings is equipped by
    default to all type

 Characteristic
 Chamber has high measure accuracy
 because this is produced by the method
 that pushes out the aluminum. High
 air- speed is gotten by low pressure
 because this inside is simple
 rectification structure. And, the hot-air
 of 200C can be supplied.                    
 

 Option
 Each piping parts with the flange that
 is entered to the option catalog is
 setting by the flange is installed to the
 inlet.


 

 

Specification

Model Bore of the inlet Slit width Max. use discharge air-speed Manufacturable length Price
50PN φ50 1.0mm 120m/s 100mm - 1000mm JPY  54,230/  100 - 400mm
JPY  66,000/  410 - 700mm
JPY  74,580/  710 - 1000mm
1.5mm   90m/s 100mm - 1000mm
2.0mm   60m/s 100mm - 1000mm
65PN φ65 1.0mm 100m/s 300mm - 1500mm JPY  81,290/  300 - 700mm
JPY  94,820/  700 - 1000mm
JPY 123,200/  1010 - 1500mm
1.5mm  75m/s 300mm - 1500mm
2.0mm   50m/s  300mm - 1500mm
75PN φ75 1.0mm 120m/s  500mm - 1500mm JPY  89,760/  500 - 700mm
JPY 105,050/  710 - 1000mm
JPY 135,300/  1010 - 1500mm
1.5mm   90m/s  500mm - 1500mm
2.0mm   60m/s  500mm - 1500mm

 

Return to the top page

 Kansai Electric Heat Corp.
   4-18, Takaidanishi 5-chome, Higashiosaka-city 577-8566 JAPAN
  TEL : +816-6785-6001 FAX : +816-6785-6002
  E-mail : sales@kansaidennetsu.co.jp